在安裝LED庭院燈時,請打開包裝并檢查LED庭院燈的完整性。有關組裝和接線,請參閱產品手冊。一般過程是:打開燈罩,安裝光源和輔助電器,然后將導線從穿線孔引出到燈桿底部,然后然后將燈頭連接到燈桿,注意擰緊緊固螺釘,然后將LED庭院燈的基礎嵌入部分的螺釘對齊,并直立放置。用螺母或墊塊校平后,擰緊設備螺母。
LED庭院燈電路接線:安裝LED庭院燈后,可以參考手冊和電工規格進行接線操作。應該注意的是,設備接線必須接地。通常,庭院燈將保留一個接地端子用于接地,以消除安全隱患。LED庭院燈價格選擇配光合理的燈。燈的配光類型應根據照明場所的功能和空間形狀來確定。使用高效的燈。在滿足防眩光要求的條件下,對于僅滿足視覺功能的照明,應選擇直下式配光燈和敞開式燈。
選擇方便設備保護和降低運行成本的燈。在有發生火災或爆炸危險以及灰塵,濕氣,振動和腐蝕的特殊地方,應選擇符合環境要求的燈。當燈具,燈具配件等高溫部件靠近易燃物時,應采取隔熱,散熱等防火措施。照明燈具應具有完整的光電參數,其各種功能應符合現行《燈具的一般要求和實驗》的有關規定及其他規格。
在選擇照明樣式時,請嘗試選擇與庭院樣式匹配的庭院燈。例如一個非常好的社區,您通常會選擇簡潔美觀的現代LED庭院燈。如果是私人別墅,則大多數人傾向于選擇典雅而迷人的古典和歐式LED庭院燈。如果它與環境匹配,則整體效果將看起來更漂亮。
When installing LED yard lights, please unpack and check the integrity of LED yard lights. Refer to the product manual for assembly and wiring. The general process is: open the lampshade, install the light source and auxiliary appliances, and then lead the wire from the threading hole to the bottom of the lamp post, and then connect the lamp cap to the lamp post, pay attention to tighten the fastening screws, and then align the screws of the base embedded part of the LED garden lamp, and place it upright. After leveling with a nut or pad, tighten the nut.
Circuit wiring for LED garden lights: After installing LED garden lights, you can refer to the manual and electrical specifications for wiring operations. It should be noted that equipment wiring must be grounded. Typically, yard lights will retain a ground terminal for grounding to eliminate safety hazards. The price of LED garden lamp is reasonable. The type of light distribution should be determined according to the function and spatial shape of the lighting place. Use efficient lights. Under the condition of meeting the requirements of anti-glare, for the lighting that only meets the visual function, straight down lighting lamp and open lighting lamp should be selected.
Choose lamps that facilitate equipment protection and reduce operating costs. In special areas where there is a risk of fire or explosion as well as dust, moisture, vibration and corrosion, the lamp should be selected in accordance with the environmental requirements. When lamps and lanterns, lamp accessories and other high-temperature parts near combustible, should take heat insulation, heat dissipation and other fire prevention measures. Lighting fixtures shall have complete photoelectric parameters, and their various functions shall conform to the relevant provisions and other specifications of the current "General Requirements and Experiments of Lamps and Lanterns".
When choosing a lighting style, try to select a garden light that matches the courtyard style. In a very nice neighborhood, for example, you will often opt for simple and beautiful modern LED garden lights. If it is a private villa, then most people tend to choose elegant and charming classical and European LED garden lights. If it matches the environment, the overall effect will look prettier.