當太陽能電池板被光照時，它能夠將光能轉換成電能，使電流從側流向另側。太陽能電池板是根據這一原則規劃的。只有當太陽能電池板被太陽能電池板照亮時，它們才能發生相當于接納光110的電能。
為了盡量削減太陽能電池板的光反射，通常要覆蓋一層薄膜以避免光反射，使太陽能電池板的表面呈紫色。光怎么能轉換成電能？太陽能路燈主要由四部分組成：光伏組件、發光二極管、太陽能電池和太陽能路燈控制器。光伏組件白日吸收陽光，將太陽能轉化為儲存在太陽能電池之中的電能，晚上天亮時放電。
一般晴天，在理想的光照強度之下，滿功率只有4小時，每次充電之后，能確保每次充電5天超過，并能在連續3天的雨之中正常作業。怎么控制路燈的開關？此刻，路燈之上的設備控制器發動功能。根據不同的要求，路燈能夠規劃為燈光控制或時刻控制。它不僅能夠控制電池的充放電時刻，還能夠控制電池的放電強度。此外，由于設備的朝向不同，太陽能路燈能否進行有用照明將發生相當大的影響。技術人員也可根據使用場所日常照明的具體情況對設備進行規劃。
When a solar panel is panel illuminated，it converts light energy into electricity，allowing current to flow from one side to the other. Solar panels are planned according to this Principe. Only when the solar panels are illuminated by the solar panels can they generate the equivalent of 110 light.
To minimize the reflection of light from solar panels，a thin film is usually covered to prevent light reflection，making the surface of solar panels purple. How can light be converted into electricity？The solar street lamp is mainly composed of four parts：photovoltaic module，light-emitting diode，solar cell and solar street lamp controller.Photovoltaic modules absorb sunlight during the day，converting solar energy into electricity stored in solar cells that discharge at dawn at night.
General sunny days，under the ideal light intensity，full power is only 4 hours，after each charge，can ensure that each charge 5 days more than，and can work normally in the rain for 3 consecutive days.How to control the light switch?At this point,the device controller on the street lamp is activated.
Street lamps can be programmed for light control or time control according to different requirement.It can not only control the charge and discharge time of the battery, but also control the discharge intensity of the battery. In addition, depending on the orientation of the device,the usefulness of solar street lighting will have a considerable impact.Techicians can also plan the equipment according to the specific situation of daily lighting in the place.
.
